Siemens AERA 1.5T 48 Channel with AI DEEP Resolve PRO Software
Siemens MAGENTOM 1.5T AERA MRI Scanner offers a full range of applications that propels you to the next level of imaging and patient care. This MRI system delivers exceptional quality and speed, allowing you to expand your MRI services effectively.
Key Features
- 145 cm system length and 70 cm open bore design.
- Up to 70% faster scan capabilities compared to non-AI systems.
- Zero Helium Boil-off, actively shielded water-cooled Siemens gradient system for maximum performance.
- TrueForm Magnet and Gradient Design.
- Tim 4G (Total Imaging matrix in the 4th generation) for excellent image quality and speed
- Siemens unique DirectRF technology enabling the all-digital-in/ digital-out design
- Dual-Density Signal Transfer Technology
- Tim Coil Interface
- Dot (Day optimizing throughput) for higher consistency, flexibility, and efficiency (SW syngo MR XA60)
- Dot Display & Dot Control Centers
- Brain Dot Engine
- Full TIM applications Suites
- Florida AHCA and California HCD Compliant
Brand New Build Attributes
The Siemens Magnetom AERA 1.5T 48 Channel 70cm Wide Bore offers the AI DEEP RESOLVE PRO SOFTWARE PACKAGE: Sharper images and scan times up to 70% faster to improve patient experience and satisfaction. The Tim Applications Suite also allows excellent head-to-toe imaging:
- Neuro Suite
- Angio Suite
- Cardiac Suite
- Body Suite
- Onco Suite
- Breast Suite
- Ortho Suite
- Pediatric Suite
- Scientific Suite
Other Additions to note
- A full complement of Coils
- Peripheral Angio 36, Head/Neck 20, Body Matrix, Shoulder L and Small, and Spine Coil
- Flex Large 4, Flex Interface
- Medrad Dual Head Injector
- 8 x 48’ AMST Trailer
Siemens MAGNETOM AERA 1.5T Mobile MRI Scanner
The Siemens 1.5T MAGNETOM AERA Mobile MRI scanner is commonly deployed to facilities that have a similar MRI platform, as these scanners can be introduced quickly without altering any established imaging practices.
Siemens MAGNETOM Aera at a glance
The Siemens MAGNETOM AERA is widely regarded as dependable, with its wide-bore 1.5T MRI platform that is built to handle consistent daily volume. Facilities often select the Siemens Aera when they have an expectation of standardization, particularly when technologists, protocols, and referring patterns are already aligned to this type of system.
In mobile deployments, the MAGNETOM AERA supports any known workflows while also extending capacity. Its balance of throughput and ability to accommodate patients makes it a frequent choice for many programs.
Best fit for:
- Hospital imaging departments experiencing patient overflow or undergoing renovations
- Outpatient centers restricted from adding in-house MRI services due to space and budget limitations
Specs and configuration checklist
| Field Strength and Bore Category | The wide-bore 1.5T design supports routine clinical imaging while also improving tolerance for patients who struggle with claustrophobia. |
| Channel Configuration | Channel availability ranges from 24 through 48 helping facilities manage volume. |
| Coil Package Coverage | A broad coil package can support all spectrum of imaging and reduce the need for workarounds between exam types. |
| Site Requirements | Planning for mobile deployments focuses on access, power compatibility, and network connectivity. Please see Platinum’s What To Expect page for more details. |
Mobile deployment with Platinum
Deployment of the Siemens MAGETOM AERA in a mobile environment follows a defined sequence built around continuity of patient care and other operations.
Step 1: Confirm clinical scope and configuration fit
Platinum starts by assessing the types of exams against the daily scan volume, along with protocols and the duration of the intended deployment. This step is helpful in clarifying that the Siemens MAGETOM AERA is the correct choice for a facility and that it can support their needs
Step 2: Coordinate site planning and logistics
Next, Platinum works with the operations team to confirm trailer placement and the access route to the placement pad. We also assess electrical readiness and network/PACS (picture archiving and communication system) connectivity.
Step 3: Deliver, set up, and validate before scanning
Prior to delivery, we ensure the designated location for the mobile unit is fully prepared and ready for clinical use. After initial setup, the team will confirm that image quality and connectivity are consistent with the expectations of the Siemens MANGETOM system.
Step 4: Support
During deployment, Platinum Mobile Imaging provides technical support to maintain reliable daily operations that align with a facility’s busy schedule.
Mobile Imaging Services With Platinum Mobile Imaging
Platinum Mobile Imaging specializes in providing comprehensive mobile solutions through our fleet, including newly built and refurbished mobile units. We offer end-to-end service, covering everything from the system to the trailer. We also provide thorough application training and ongoing support to prepare your site for mobile deployment. Our flexible rental options allow you to plan, ensuring timely delivery of the mobile unit you need. Reach out to us today for a quote and to address any inquiries you may have about mobile imaging.
Frequently asked questions
What channel configurations are common for the Siemens Aera 1.5T?
Typically 24 through 48 channels.
How quickly can a mobile Aera be delivered?
Timing depends on availability and site readiness, and scheduling is coordinated during planning.
What does the facility need to prepare on-site?
- Site & Parking: Level, reinforced surface with safe patient access and clear maneuvering space.
- Electrical: Dedicated power supply and proper grounding; backup power if required.
- Connectivity: Network access for PACS/RIS and secure internet for service support.
- Safety & Compliance: Regulatory permits, radiation or MRI safety compliance, and state licensure as needed.
- MRI Specifics: Magnet/radiation safety, shielding verification, and proper equipment clearance.
- Patient & Staff Workflow: Waiting areas, restroom access, and staff workflow coordination.
- Pre-Delivery Inspection: Confirm readiness of all site requirements before unit arrival.
Can you use our existing technologists and protocols?
Yes. Most facilities operate the Siemens Aera using existing staff and established protocols.